Acer P1165E Service Manual

For your convenience, all service parts, identified in this Acer P1165E Service Manual, are available through normal channels of distribution of Acer. In addition to the service part number, generic description has been given to the extent possible, to enable its service technicians to replace equivalent components that may be available from other sources. All service parts orders will be honored. However, in the case in which deemed that the generics are available for several common sources, as it would be the case with a fuse, resistance or semiconductor industry standard, may be more economical and expeditious acquire part locally.

Attention to management; Do not touch the lamp until it cools completely because the bulb is very hot during operation and immediately after shut down. The lamp must be firmly secured to the base or to the socket. Turn off the power supply during maintenance. Do not attach the lamp except the outer surface of the reflector. Wear gloves and goggles when handling the lamp. Avoid any shock or unusual vibration in the lamp. The lamp contains mercury. Breakage can cause mercury to flow out of the reflector. Please give the provision in the product of the customer. Do not pull the cable and the plug for more than 24.5N. Be careful handling the lamp because it is made of glass. Please note to store or handle the lamp, because there is a projection of this lamp with reflector forward. Do not touch the bulb or the area of the reflector mirror.

Attention for use; Do not close or cover the lamp with any flammable material. During the operation, the lamp is under extremely high pressure. Please manage the provision in the customer's product to prevent fragments of bulb and mercury to flow out of it. If the lamp bursts in the event of an emergency, the sound occurs. The operation of the lamp must be with the specified lamp controller and the system only. Do not directly look lamp during operations. Do not expose your skin directly. We recommend that you put something to protect your skin. For example, shirt long sleeves, gloves, glass and so on. Do not modify the lamp and never use a lamp that has been modified. Avoid any shock or unusual vibration in the lamp during operation. Do not use broken lamps. Get rid of lamps used according to local instructions. Do not switch on the lamp while the system is opened. The lamp contains mercury. If the lamp bursts during operation, ventilate the area enough as to avoid inhalation of dangerous fumes of mercury. Use the lead below 200.C to prevent a deterioration of the lining of the fluorocarbon resin coating. The wire insulation coating must not touch the reflector. Change the lamp that has already passed the time of life immediately.

Updated flow of the firmware this chapter provides information on the relevant equipment and the updating to the firmware update procedure. Check the version of firmware and the composer before any firmware update procedure. During the download of the firmware, please, do not turn off the computer or projector, this will cause damage to the flash memory. And the need to return the unit to the manufacturer for the recovery of memory flash. When the Device Manager can not recognize the DDP2230 as the blow, please disable this device. This will not affect the update procedure.

 Download Acer P1165E Service Manual

Tweet